Joyetech eVic-VTC Mini VW Full Kit With 18650 SANYO Battery
Joyetech eVic-VTC Mini VW Full Kit With Free 18650 SANYO Battery
Joyetech eVic-VTC Mini VW Full Kit With SANYO Battery (No Wall Adapter), is an innovative, and the most mature temperature control MOD. Both VT and VW functions available: VT-Ti (titanium), VT-Ni (Nickel 200) and VW modes applied. It brings new experience of VT control, a new flavor with every change of temperature setting, also battery performance being prolonged at the same time.
Size: 22.20 x 38.20 x 82.00mm
Output mode: VT-Ti/VT-Ni/VW mode
Output wattage: 1-60W
Resistance range: 0.05 - 1.0ohm for VT mode
0.15 - 3.5ohm for VW/Bypass mode
Temperature range: 100 - 315℃ / 200 - 600℉
It comes with
- 1 x Joyetech eVic-VTC Mini MOD, without battery
- 1 x Joyetech eGo ONE mega atomizer - 4ml (0.2ohm Ni pre-installed)
- 1 x replacement 0.4ohm Ti atomizer head
- 1 x Micro USB cable
- 1 x User manual
Simple packing. Customary Packing from the factory, the packing is subject to change without notice.
1. 3 Modes：VT-Ni, VT-Ti, Traditional VW;
2. Support with Pure Nickel(Ni200, made in USA) and Pure Titanium wire, and 100% organic cotton;
3. Changeable Battery and Magnetic Cover
4. Save huge of battery and liquid consumption without a dry hit
5. Enhance flavor experience with the change of temperature settings by displaying in the big OLED screen;
6. 3 Attractive colors available；Black, White and Cyan
Slide down the battery back cover and put one 18650 cell into the battery body. Press the fire button 5 times in quick sucession to turn the device on and off.
Recommends: high-rate 18650 cell.
Vaping: Hold the fire button and inhale through the mouthpiece. Release the Fire button and exhale.
Stealth Function: While the device is on, simultaneously hold the fire button and the left regulatory button. This will switch between Stealth on and Stealth off function.
In Stealth on Mode, you can vape with the OLED screen off. To quick see your settings in stealth on mode, you can tap the fire button to display the settings.
Adjustment Lock Function: While the device is on, simultaneously press the two regulatory buttons.This will switch between Adjustment Lock and Adjustment Unlock function.
In adjustment Lock mode, the regulatory button will not function to prevent accidental VT/VW/Bypass setting adjustments.
Shift Between VT/VW/Bypass Mode:
1. Press the fire button 3 times to enter the menu.
The OLED screen presents 4 rows of information:
(1) Temp Ni (VT-Ni), Temp Ti (VT-Ti), Power(VW) and Bypass
(2) In Temp Mode, this row displays output power (W).
In Power and Bypass modes, it will display output voltage (V).
(3) Atomizer Resistance. In VT Mode, this will also display the Resistance Lock.
(4) User information (battery indicator, total vapor puffs and vaping time)
2. After pressing the fire button 3 times, the first row will flash to indicate you enter into the menu. Press the right regulatory button to switch between VT-Ni, VT-Ti, VW and Bypass mode.
Press the fire button, or leave the display to flash 10 times on the current setting to confirm and exit the menu.
VT-Ni and VT-Ti mode:
In VT mode, coil temperature can be adjusted (from 100-315℃ or 200-600°F) by the regulatory button. A momentary turn of the regulatory button will increase the temperature by increments of 5℃ or 10°F. Long pressing the right or left regulatory button will rapidly increase or decrease the temperature setting.
In VW mode output wattage can be adjusted from 1W-60W by pressing the regulatory button. Long pressing the right or left regulatory button will make the wattage setting rapidly increase or decrease.
It is a direct output mode of voltage. In this mode, to make sure the device work properly, the resistance of atomizer head msut be in the range of 0.1-3.5ohm.
- It supports Titanium (Ti) and Nickel (Ni200) Wire, eGo ONE CLR Head, Delta 2 LVC Head & Delta 2 RBA Coil;